How do you test sanitizer for optimal performance? Ensuring your sink is good to go.

The health department mandates that you test sanitizer PPM or parts per million. So…

How do you test sanitizer for optimal performance?

You can do this by using the test strips found in the sealed box on the wall next to the sanitizer dispenser. That is where it should be, at least!

This sanitizer test and having the correct levels will ensure that all pots, pans, and dishes are protected from contamination after they are cleaned.

  • First tear off a two inch strip of test paper from the test strip roll.
  • Dip the strip into the sanitizer solution without touching the bubbles.
  • If the strip is yellow simply dip it for one second in the water and remove it.
  • If it is an orange test strip you should hold it under the water for ten seconds.
  • Once the strip is extracted compare it to the chart on the side of the test strip container.
  • The color of the wet end of the strip should match the color on the chart between 200 and 400 PPM.
  • If this is so you are good to go
    OR
    If the setting is too high you can add water from the faucet until it is correct.
  • If it is too low inform and ask your manager for help.

What is ProfitMax Chemical?
*
Environmentally Sensitive Cleaning Solutions

Products – Training – Service – Solutions.
*
2073 FM 89
Buffalo Gap, Texas 79508.
United States of America.
*
Website
LinkedIn

How do you test sanitizer for optimal performance? Ensuring your sink is good to go.